Electrical engineering projects


Electrical engineering is a field of engineering that generally deals with the study and application of electricity, electronics and electromagnetism.

Feedback Circuits

It is an important concept for electronic circuit designers.You can do lots of project based on feedback concept.Perhaps you can design a circuit(s) that demonstrates how adjusting one part of a circuit causes another part to reflect feedback.

Thermostat is one of the best example of feedback device. A thermostat is a component of a control system which senses the temperature of a system so that the system's temperature is maintained near a desired setpoint. The thermostat does this by switching heating or cooling devices on or off, or regulating the flow of a heat transfer fluid as needed, to maintain the correct temperature.

Related PDF :

Motor Controlled Feedback System (PDF): In most motor control systems, several sensors are used to provide feedback information on the motor. These sensors are used in the control loop and to improve the reliability by detecting fault conditions that may damage the motor

A basic 12V to 240V inverter


Inverter, is an electrical device that changes direct current (DC) to alternating current (AC).The converted AC can be at any required voltage and frequency with the use of appropriate transformers, switching, and control circuits.It is always a good project for a start .You can chose this as your final year project because it takes only a couple of weeks to build and design a passable inverter that worked. Once, it gets build, you can improve it anytime.

Oscilloscope

Oscilloscopes are commonly used to observe the exact wave shape of an electrical signal. In addition to the amplitude of the signal, an oscilloscope can show distortion, the time between two events (such as pulse width, period, or rise time) and relative timing of two related signals.

Oscilloscopes are used in the sciences, medicine, engineering, and telecommunications industry. General-purpose instruments are used for maintenance of electronic equipment and laboratory work.

You can build your own oscilloscope and use it to show the sign wave of a car battery.

Make a solid state tesla coil :



A Tesla coil is an electrical resonant transformer circuit invented by Nikola Tesla around 1891.It is used to produce high voltage, low current, high frequency alternating current electricity. There are a good number of websites to get ideas and help. Keep the power down to keep it safe.

Tesla coil circuits were used commercially in sparkgap radio transmitters for wireless telegraphy until the 1920s. Today their main use is entertainment and educational displays.

Related Project :

Power Transmission without wires

Hydrogen fuel cell 

A Hydrogen fuel cell is a device that converts the chemical energy from a fuel into electricity through a chemical reaction with oxygen or another oxidizing agent.They require a constant source of fuel and oxygen to run, but they can produce electricity continually for as long as these inputs are supplied.


You can implement it on a chip which you could use for low power applications in any electronics project.
Related Project :
Microbial fuel cell 

Robots :

Line Follower Robot  : Robots which use line as their path guide.

More Robotic Projects


Related Projects :

Digital Electronics Projects
Circuit bending
What is circuit bending?
Circuit bending is basically re-wiring circuit boards(often in children musical toys) to make unique sounds for which it was not originally intended.
Circuit bend Projects : 
Project of University of Texas
This project is from parson.edu
Design for interactive media

Circuit Bending of Furby :
Audio amplifiers


How to make audio amplifiers?
Related PDF Files :

Berkeley final project Audio amplifier details (pdf) 

Designing and Building a Subwoofer Amplifier


Anti Collision System

What is Precrash System ?
Anti Collision Protocol
Automatic Driving and Collision warning demo

Electrical Lie Detector:
Instructions of Making lie detector
Interesting books related to this topic :
Lie behind Lie Detector(pdf)

How to build a lie Detector (Video)

Electronic lie detector will cost you around 45 dollars :
3906 and 3904 transistor $0.98 each
Resistors around $ 1 dollar
Capacitor around $ 0.50
8 ohm speaker $3 dollars
9 volt battery around $1 dollar
18 gauge wire : It will cost around $ 5 dollars for 100 feet
$3.75 for 100 feet wire
electrical solder : 10 dollars
100% clear silicone caulk : 4 dollars
Clear, flexible plastic sheet. : 12 dollars
Total cost would be around $ 42 dollars.

Other Projects:
Drum Trainer
Automated Vehicle Control System:
Related PDF:
Automated Vehicle
MIT ICA Conference

Related PDF :

GPS Based Anti Collision Mechanism
Driver Warning System
Vehicle Traffic Simulator

Computer interfacing
Computer Interfacing Projects

Brain Computer Interface Video :
Read more about above project

High Definition Media Interface

HDMI ( High definition media interface ) is a compact audio/video interface to transmit uncompressed digital data.HDMI products started shipping in late 2003. It is a digital alternate of all major technologies such as RF signals, co axial cables etc.

To learn more about HDMI read wiki article .

Other Useful Articles :

HDCP in HDMI Systems

Other Ideas:
Automatic Light Control
RFID( Radio Frequency Identification)
RFID based Mobile Payment System 
Micro Electric Urban Vehicle 
Creating Electricity using Fruits and Vegetables 
Power Transmission Without Wires 
Power generation using Wind Turbine kites
Wireless Mobile Chargers
Human Tracking Fan System
Embedded System Project
Simple Electronic Electroscope
Computer Controlled Remote Control Car Video
Computer Controlled Wireless Robot
Mobile Control Electrical appliances 
Led lighting controller
Microcontroller projects
Sixth Sense Technology of Pranav Mistry
Related :
Do It Yourself Projects
Home Electrical Projects

No comments :